18
2.
Put the appliance in a suitable place.
3.
Clean the appliance before using it for the first time.
Use
1.
Wait at least 30 minutes after the appliance has been moved. Plug in the power cord and start the
appliance.
2.
Fill the reservoir with fresh water.
WARNING!
Fill with potable water only.
3.
Press
to start the appliance.
Control panel
Buttons and status lights
Function
Start ice making, standby, troubleshooting
WORK
Indicates that the appliance is supplied with voltage.
ICE FULL
Indicates that the ice box is full.
ADD WATER
Indicates that the water reservoir is empty. Fill with water.
MAINTENANCE
CLEANING
1.
Unplug the power cord before cleaning and if the appliance is not going to be used for some time.
2.
Clean the inside and outside of the appliance with a cloth moistened with a mild detergent.
3.
Clean the water tank
-
Unscrew the cover over the water outlet and drain off the water.
-
Pour fresh water into the tank and rub the inside of the tank with a clean cloth. Pour out the
water and rinse the tank several times. Screw the cover on the water outlet.
4.
Do not use boiling water or strong detergents or solvents.
5.
Switch off the appliance, unplug the power cord, drain off the water and wipe the appliance with a
dry cloth if it is not going to be used for a prolonged period. Store the appliance in a clean, dry place.
TROUBLESHOOTING
Problem
Cause
Action
The WORK status light
does not go on.
The appliance is not switched
on.
1.
Check the power supply.
2.
Check that the power cord is
plugged in.
3.
The appliance is defective.
Contact your dealer.
The ICE FULL status
light is on.
1.
The ice box is full.
2.
The subtemperature
relay has tripped
(ambient temperature
lower than 5°C).
1.
Remove the ready ice cubes
2.
Place the appliance where the
ambient temperature is higher
than 5 °C.
The ADD WATER status
light goes on.
The water reservoir is empty.
1.
Fill the reservoir with drinking
water and press the button
.
2.
Fault in the water system. Contact
your dealer.
The status lights ICE
FULL and FILL WATER
go on.
The ice making box is not not
correctly positioned.
1.
Check and correct the position of
the ice making box.