– 140 –
③
Setting the pattern function on a step-by-step basis
<New sewing pattern edit screen>
1) Set the pattern function with buttons
❸
on a step-by-step basis. Refer to
2) The total number of steps you have set
is displayed on the right of section
A
.
The current step is displayed on the left
of section
A
. The current step can be
changed with
❹
.
3) Press
❺
.
The "sewing pattern number registra-
tion screen" is displayed.
Press
❻
to display the data dis-
card confirmation screen.
Steps of procedure to be taken after the
aforementioned step are same as steps
③
to
④
in
9-2-3. Setting the step from which polygonal-shape stitching is started
In the case it is necessary to re-sew a pattern from the middle of the pattern after the occurrence of
troubles such as thread breakage, it is possible to re-start sewing from an arbitrary step of the pattern.
The current step can be changed by press-
ing
❶
on the sewing screen for polyg-
onal-shape stitching pattern.
<Sewing screen (Polygonal-shape stitching pattern)>
A
❺ ❻
❹
❸
❶
Summary of Contents for SC-956
Page 1: ...INSTRUCTION MANUAL LH 4500C Series SC 956...
Page 180: ...175 11 GAUGE PARTS LIST 43 22 TABLE OF EXCHANGING GAUGE PARTS LH 4578C TYPE F LH 4578C F type...
Page 181: ...176 23 TABLE OF EXCHANGING GAUGE PARTS LH 4578C 7 LH 4578C 7...
Page 182: ...177 47 24 TABLE OF EXCHANGING GAUGE PARTS LH 4588C 7 LH 4588C 7...
