– 25 –
ENGLISH
6. Setting of functions of SC-922
Functions can be selected and specified.
(Caution) For the function setting procedure of any operation panel other than CP-18, refer to the In-
struction Manual for the operation panel to be used.
1) Turn ON the power wth
swtch
7
held pressed.
(The tem whch has been changed
durng the prevous work s ds-
played.)
* If the screen dsplay does not
change, re-carry out operaton de-
scrbed n step 1).
(Caution) Be sure to re-turn oN the
power switch when one or more
seconds have passed after turn-
ing it oFF. If the power switch is
re-turned oN immediately after
turning it oFF, the sewing ma-
chine may fail to operate normally.
In such a case, be sure to turn oN
the power switch again properly.
2) To move the settng No. forward,
press
swtch
4
. To move the
settng No. backward, press
swtch
3
.
(Caution) If the setting No. is moved
forward (or backward), the previ-
ous (or subsequent) content of
the setting is confirmed. Be care-
ful when the content of a setting
is changed (when the
/
switch is touched).
Example) Changing the maximum num
-
ber of revolutons (settng No. 96)
Press
swtch
3
or
swtch
4
to call settng No. "96."
The current set value s dsplayed
on ndcator
B
.
Press
swtch
5
to change the
set value to "2500".
* The content of settng of the settng No. returns to the ntal value by pressng
swtch
5
and
swtch
6
smultaneously.
3) After completon of the changng procedure, press
swtch
3
or
swtch
4
to confirm the up
-
dated value.
(Caution) If the power is turned oFF before carrying out this procedure, the changed content is not up-
dated. When
switch
3
is pressed, the display on the panel changes to the previous setting
No. When
switch
4
is pressed, the display on the panel changes to the subsequent setting
No. after completion of the operation, the machine is returned to the normal sewing state by turn-
ing oFF the power and re-turning it oN.
6
5
4
3
7
6
5
4
3
7
6
5
4
3
7
B
A
D
E
C
B
A
D
E
C
B
A
D
E
C
