– 41 –
iiiii
Function of stop immediately after the reverse feed stitching at the start of sewing (Function setting No. 60)
This function temporarily stops the sewing machine even when keeping depressing the front part of the pedal at
the time of completion of process of reverse feed stitching at the start of sewing.
It is used when sewing a short length by reverse feed stitching at the start of sewing.
0 : Not provided with the function of temporary stop
of the sewing machine immediately after the
reverse feed stitching at the start of sewing
1 : Provided with the function of temporary stop of
the sewing machine immediately after the re-
verse feed stitching at the start of sewing
ooooo
Function of soft-down of presser foot (with AK device only) (Function setting Nos. 70 and 49)
This function can softly lower the presser foot.
This function can be used when it is necessary to decrease contact noise, cloth defect, or slippage of cloth at the
time of lowering the presser foot.
(Caution) Change the time of function setting No. 49 together at the time of selecting the function of soft-
down since the sufficient effect cannot be obtained unless the time of function setting No. 49
is set longer when lowering the presser foot by depressing the pedal.
0 to 250 ms
10 ms/Step
0 : Function of soft-down of presser foot is not operative. (Presser foot is rapidly lowered.)
1 : Selection of function of soft-down of presser foot
ppppp
Function of improving inching operation (Function setting Nos. 71 and 72)
This function improves operability of one-stitch sewing by operating the high-speed switch for the pedal or
sewing machine for standing work.
The more the set value becomes, the more the speed limitation at the start of rotation is remarkably added and
operability of one-stitch sewing is improved.
Function setting No. 71 limits the speed at the time of re-acceleration on the way of reducing speed.
Function setting No. 72 limits acceleration from the stop state.
(Caution) This function fails to work when turning ON the power or starting sewing immediately after
thread trimming.
0 to 5
0 to 5
aaaaa
Function of reducing speed of reverse feed stitching at the start of sewing (Function setting No. 92)
Function to reduce speed at the time of completion of reverse feed stitching at the start of sewing : Normal use
depending on the pedal condition (Speed is acceralated to the highest without a break.)
This function is used when temporary stop is used properly. (Cuff and cuff attaching)
0 : Speed is not reduced.
1 : Speed is reduced.
sssss
Retry function (Function setting No. 73)
When the retry function is used, if the sewing material is thick and not piereced with needle, this function makes
the needle pierce in the material with ease.
0 : Normal
1 : Retry function is provided.
6
0
0
4
9
1
4
0
7
0
0
7
1
0
7
2
0
9
2
0
7
3
0
Stop the sewing machine
temporaily to change direction
of sewing products.
Function setting
No. 72
Function setting
No. 71
rpm
0
5
0
5
Pedal neutral
Depressing pedal
t
Sew without stopping
without a break.
Temporary stop
