– 12 –
C
C
B
B
A
A
B
B
A
A
2) Secure the power switch plate to the alu-
minum plate of the front table (right) with
T-head screw
A
and nut
B
.
3) For switch button (asm.)
C
, change round
the direction of assembly.
Then, secure it to the aluminum plate of the
front table (right) with T-head screw
A
and
nut
B
.
Secure the switch button (asm.) so that its
three switch buttons are faced upward.
B
B
A
A
4) For the laser type model, also change instal-
lation of the power switch as shown in the
figure.
Changes described in the
aforementioned steps 3) and 4) may
not be carried out depending on the
usage.
3-1-7. Points to be checked and precautions to be taken before turning the power ON
1) Place accessory levels at the four corners of
the main table and adjust the table so that the
sewing machine is level.
Level
