– 84 –
6-2-7. Usage instructions
6-2-7-1. Creating patterns
When you want to create a knife pattern, take care to ensure that the shortest distance of 3 mm or more is
provided from the knife locus line to the seam line. Sewing patterns are created using the Layer 1, and knife
patterns are created using the Layer 2.
Fig. 1
Fig. 2
6-2-7-2. Installing the sewing software
Open the exclusive rotary knife sewing software. Select the file and click it to open. Select the file you want
to edit. Set a graphic of the knife you want to use to the Layer 2 (as shown in Fig. 1). Double-click on Layer 2
to open the interface (as shown in Fig. 2). Change the Head 1 with the Head 2. Then, confirm with a click on
the OK button to complete the procedure.
