JUKI MO-6800D/DD20 Series, Instruction Manual, Page: 6 / 77

– 3 –
3. INSTALLATION
WARNING :
• Machine installation should only be carried out by a qualified technician.
• Contact your dealer or a qualified electrician for any electrical work that may need to be done.
• The sewing machine weighs 28 kg. The installation should be carried out by two or more people.
• Do not connect the power cord until installation is complete. The machine may operate if the treadle
is depressed by mistake, which could result in injury.
• Use both hands to hold the machine head when tilting it back or returning it to its original position.
If only using one hand, the weight of the machine head may be too heavy to hold, and may cause
human physical injuries.
• To protect against possible personal injury due to abrupt start of the machine, be sure to start the
following work after turning the power off and ascertaining that the motor is at rest.
3-1. Installing the suction device
Inlet of the
suction
device
Suction device
mounting base
Screw
Accessory
screw
Elbow
Table
1) Attach inlet of the suction device to the table with
accessory screws supplied with the unit. Fit the
elbow in the inlet from the underside of the table.
2) Attach the dust bag mounting base to the table
with the accessory screws.