JUKI MO-6800D/DD20 Series, Instruction Manual

Page: 46 / 77

– 43 –
Function setting No. P026: It is possible to select either the semi-automatic mode or the free stitching
mode with this function setting number.
Under the free stitching mode, the sewing machine will not stop as long as the front part of the pedal is
held depressed after the completion of thread trimming.
P026: 0: OFF (Semi-automatic)
1: ON (Free stitching)
While the free stitching mode is selected, any of C , D and E is not displayed on the op-
eration panel.
[Simplified list]
This list indicates the setting method and function of the main parameters with respect to sewing modes.
Refer to the function setting list for the parameters that are not included in this simplified list.
Sewing mode Full
automatic
Semi
automatic
Manual
Free
stitching
Remarks
Operation panel display No display
P018: Full automatic / Semi-
automatic mode 1 ： Full
automatic
0 ： Semi
automatic
ー 0 ： Semi
automatic
Function is not changed
over under the manual
mode.
P020: Automatic sensor ON/
OFF 1 ： ON 1 ： ON 0 ： OFF 1 ： ON
P26: Free stitching ON/OFF ー 0 ： OFF ー 1 ： ON Under the full automatic
mode and the manual
mode, free stitching
function is not changed
over.
P21: Front sensor ON/OFF 1 ： ON
0 ： OFF
* 1
1 ： ON
0 ： OFF
1 ： ON
0 ： OFF
1 ： ON
0 ： OFF
*1 If the front sensor is
set to "OFF", the sewing
machine operation will be
disabled.
Start of sewing Front
sensor *2 Front
Pedal Pedal Front
Pedal *2 If the "P017: One shot"
is changed to "0: OFF",
the sewing machine can
be started only with the
front sensor.
End of
sewing
DD22 Intermediate
sensor Intermediate
sensor ー ー Under the manual mode
or the free stitching
mode, the sewing
machine is operated with
the pedal instead of the
sensor.
DD23 Rear sensor Rear sensor ー ー
Pedal
operation Depressing
on the back
part of pedal
Neutral
position Neutral
position Neutral
position