JUKI MO-6800D/DD20 Series, Instruction Manual

Page: 44 / 77

– 41 –
6-5. Details of setting of the main functions
❶
❸
P N R
C
D
E
G
H
J
Q
❷
❼
❽
❾
A
K
L
❹
❻
❺
When the manual mode
is selected
E
If you change any of the below-stated parameters during sewing, the set value of the
parameter will be rendered effective by depressing the back part of the pedal (refer to
"6-4. Function setting table" p. 33
).
If you change any parameter other than those stated below during sewing, the set value
of the parameter will be rendered effective immediately.
If you change the parameter before starting sewing, the set value of the parameter will
be rendered effective immediately.
P002 Soft start ON / OFF
P003 Soft-start sewing speed
P004 Number of soft-start stitches
P038 Tension release ON / OFF
P039 Tension-release continuing number of stitches at the beginning of sewing
P049 Automatic suction ON / OFF
P050 Front suction, continuing number of stitches
P056 Low pressure mode ON / OFF
P057 Suction synchronization time
P058 Continuous material feeding section ON / OFF
When any mode other
than the manual mode is
selected
If you change the parameter during sewing, the set value of the parameter will be
rendered effective after the completion of sewing.
If you change the parameter during sewing and stop sewing before the end of sewing
is reached, the set value of the parameter will be rendered effective when you start
sewing from the beginning.
If you change the parameter before starting sewing, the set value of the parameter will
be rendered effective immediately.
① Selection of the soft-start function (Function setting No. P002)
P002 0: Soft-start OFF
1: Soft-start ON
In addition, the speed limit during the soft-start operation and the number of stitches that are sewn with
the soft-start function can also be changed. (Function setting Nos. P003 - P004)
P003 Settable range: 200 - 6000 [sti/min] <100 sti/min>
P004 Setting range: 1 - 100 stitches