JUKI MO-6800D/DD20 Series, Instruction Manual

Page: 14 / 77

– 11 –
3-7. How to install the power plug
WARNING :
1. Be sure to attach the ground wire (green/yellow) to the specified location (on the ground side).
2. Take care not to allow terminals to come in contact with each other.
1) Connect the power cord to power plug ❶ . Con-
nect the blue and brown wires (1ø) to the power
supply side and the green/yellow wire to the
earth side as illustrated in the figure.
1. Be sure to prepare the power plug ❶
which conforms to the safety standard.
2. Be sure to connect the ground lead
(green/yellow) to the grounding side.
Blue
Brown
Green / Yellow
(ground wire)
AC 220-240V
1ø 220-240V
❶
2) Check that the power switch is in the OFF state.
Then, insert the power plug ❶ coming from the
power switch into the plug receptacle.
In prior to the connection of the power
plug
❶ , re-check the supply voltage spec -
ification indicated on the control box.
* The power plug ❶ is different in shape ac -
cording to the destination of the sewing ma -
chine.