JUKI MF-7200D/U45, Instruction Manual

Page: 50 / 260

– 9 –
$
. AIR PIPING DRAWING (UT45)
1. Piping of the thread trimmer device
1. Piping drawing with the needle thread trimmer.
!1
3
4
9
1
2
!0
9
!0
!1
@3
9
!1
WARNING :
To protect against possible personal injury due to abrupt start of the machine, be sure to start the
following work after turning the power off and ascertaining that the motor is at rest. In addition, cut the air
supply from air compressor.
– 6 –
ENGLISH
(Caution) For the operation panel other than CP-18, refer to the Instruction Manual for the operation panel to be
used for the setting procedure of the machine head.
6
5 4 3
6
5 4 3
6
5 4 3
(4) Setting procedure of the machine head
2) The type of machne head can be se-
lected by pressng swtch
5
(
swtch
6
).
* Refer to the "Lst of machne heads"
on the separate sheet or the Instruc-
ton Manual for the machne head of
your sewng machne for the type of
the machne head.
3) After selectng the type of machne
head, by pressng swtch
3
(
swtch
4
), the step proceeds to
96 or 94, and the dsplay automatcally
changes to the contents of the settng
correspondng wth the type of ma-
chne head.
1) Call functon settng No. 95.