JUKI LU-2860V-7 Instruction Manual Download

Page: 73 / 172

– 68 –

<Sewing adjustment mode screen>

(2) Sewing adjustment mode

Sewing performance can be checked using the sewing conditions you have changed before finalizing the

sewing conditions.

1) Press

❶

on the sewing screen un-

der the maintenance personnel mode.

The "sewing adjustment mode screen" is dis-

played.

<Sewing screen (Maintenance personnel mode)>

❶

❸

❷

2) Change the sewing conditions with

❷

. Then, check the sewing performance.

Below-stated sewing conditions can be adjusted.

: Stitch length

: Presser foot pressure
: Alternating vertical movement

amount

: Needle thread tension, left
: Needle thread tension, right

3) The operation is completed by pressing

❸

. Then, the current screen returns to the

sewing screen under the maintenance person-
nel mode.

Summary of Contents for LU-2860V-7













































































































































































Search results

Summary of Contents for LU-2860V-7

Reviews:

Related manuals for LU-2860V-7

Brands by name

Popular brands

JUKI LU-2860V-7, Instruction Manual

Search results

Summary of Contents for LU-2860V-7

Reviews:

Related manuals for LU-2860V-7

Brands by name

Popular brands