– 129 –
9-2-2. Creating a new polygonal-shape stitching pattern
①
Selecting the new-pattern creating function
❶
❷
A
❹ ❺
❸
❶
Display the "new sewing pattern creation screen" referring to
①
in
"9-1-1. Creation of a new pattern" p. 119
②
Creating a polygonal shape stitching pattern
③
Setting the pattern function on a step-by-step basis
<New pattern creation screen>
<New sewing pattern edit screen>
<Sewing screen (Polygonal-shape stitching pattern)>
Display the "new sewing pattern creation screen"
referring to
②
in
Select polygonal-shape stitch pattern
❶
on the stitch shape selection screen.
The "new sewing pattern edit screen" is dis-
played.
9-2-3. Setting the step from which polygonal-shape stitching is started
In the case it is necessary to re-sew a pattern from the middle of the pattern after the occurrence of troubles
such as thread breakage, it is possible to re-start sewing from an arbitrary step of the pattern.
The current step can be changed by pressing
❶
on the sewing screen for polygonal-shape
stitching pattern.
1) Set the pattern function with buttons
❷
on a
step-by-step basis.
.
2) The total number of steps you have set is dis-
played on the right of section
A
. The current
step is displayed on the left of section
A
. The
current step can be changed with
❸
.
3) Press
❹
.
The "sewing pattern number registration
screen" is displayed.
Press
❺
to display the data discard con-
firmation screen.
Steps of procedure to be taken after the afore-
mentioned step are same as steps
③
to
④
in
"9-1-1. Creation of a new pattern" p. 119
.