JUKI LK-1900B/IP-420, Instruction Manual

Page: 137 / 144

– 133 –
A
B
C
34-10 How to carry out the continuous operation
① Displaying the continuous operation setting
screen
Press continuous operation button
A
on the check program screen to display the
continuous operation setting screen.
E
② Setting the continuous operation mode
Carry out the continuous operation mode setting
on the continuous operation setting screen.
B : Operation interval (rest time)
C : Retrieval of origin of the sewing end
0 : None
1 : Once every 100 times
2 : Every time
The continuous operation setting is determined
by pressing enter button D . At this time,
the sewing machine is set in the continuous
operation mode.
③
Carrying out the continuous operation
Turn ON set-ready key E to display the
sewing screen. In this state, the sewing machine
starts the continuous operation. When the pause
switch is pressed, the sewing machine stops the
continuous operation. Once the sewing machine
re-performs sewing, it starts the continuous
operation.
To reset the continuous operation mode, turn the
power OFF once and re-turn ON the power to the
sewing machine.
D