JUKI IT-10, Instruction Manual

Page: 14 / 33

– 12 –
7-1. Configuration
7. pROdUCTION MANAGEMENT dATA MEASUREMENT BLOCk
(RIGHT pANEL)
1
A
4
C
2
D E F
3
B
G
No. Switch/indication Description
A
Clock LED Lights up when the clock is displayed.
B
7-segment indication block Indicates various ID data and clock information.
C
Product No. LED
Lights up when Product No. ID is displayed on
B
.
→
See “7-2. (1) Normal startup mode screen” .
D
Operator ID LED
Lights up when Operator ID is displayed on
B
.
→
See “7-2. (1) Normal startup mode screen” .
E
Optional ID LED
Lights up when Optional ID is displayed on
B
.
→ See “7-2. (1) Normal startup mode screen” .
F
Transmitted data LED
Lights up when Transmitted data is displayed on
B
.
→
See “7-2. (1) Normal startup mode screen” .
G
No. LED The selected No. will light up.
1
switch
The value to be indicated in
B
is set up here. The value in-
creases when this switch is pressed.
2
switch
The value to be indicated in
B
is set up here. The value de-
creases when this switch is pressed.
3
switch
The item to be indicated in
B
is changed here. The indicated
item changes when this switch is pressed.
→ See “7-2. Normal startup mode” .
4
No. switch Setup information (ID) registered for each item is selected here.