– 91 –
Confirm the shape or the like of the pattern created by using readout data or input function with trial
sewng.
For the tral sewng, the screen and the tem that can be set change accordng to the models.
Explanaton below s the example n case of AMS-210EN.
1
Display the trial sewing screen.
Press SEWING PREPARATION button
to dsplay the
tral sewng preparaton screen.
The szes n X drecton and Y drecton are dsplayed n
D
secton.
8. TRIAL SEWING
2
Prepare the trial sewing.
(a) When thread clamp button
A
s pressed, ON
/ OFF
of thread clamp can be changed alternately.
(b) When BOBBIN WINDER button
B
s pressed, the
bobbn wnder pop-up s dsplayed.
When the pedal s depressed, the sewng machne rotates
and bobbn wndng starts.
When STOP button
E
s pressed, the sewng
machne stops, and the screen returns to the tral sewng
preparaton screen.
Bobbin winder cannot be selected unless the
preparation of trial sewing is performed once.
Before performing the trial sewing, it is necessary to register the setting of the
height of intermediate presser and that of the thread tension.
8-1. Preparing the trial sewing
B
A
D
C
E