manualshive.com logo in svg

JUKI IP-420, Instruction Manual, Page: 110 / 139

Share
Download
JUKI IP-420 Instruction Manual Download Page 110

 – 106 – 

4

  Perform the item setting.

 

Press ITEM SETTING button 

 

C

 n the dsplay settng 

screen. The contents to be dsplayed n the nformaton dsplay 
secton of the pattern can be selected from CURRENT POINT 

INFORMATION 

 

L

 and COMMENT 

 

M

 of the 

pattern. The color of the selected button s changed.

 

When ENTER button 

 

N

 s pressed, the screen returns 

to the dsplay settng screen and the set contents can be 

reflected.

Information display

Comment display

L

N

M

3

  Perform the zoom setting

 

Press ZOOM SETTING button 

 

B

 n the dsplay 

settng screen. The zoom settng screen s dsplayed.

 

Select the magnification you desire to display from ZOOM 

AMOUNT button 

 

J

. The color of the selected button 

s changed 

. When ENTER button 

 

K

 s pressed, 

the screen returns to the dsplay settng screen and the set 

contents can be reflected.

J

 

In case of 100% display, the display is enlarged/
reduced so that all of the sewing possible region 
can be displayed to the pattern display region.

K

 

1.  Characters that cannot be inputted with 

the sewing machine are displayed with * 
(asterisk). 

 

2.  Number of characters that can be displayed 

is limited to the right-hand end of the 
screen. Even when the number of characters 
is inputted more than the limit, it is not 
displayed.

Summary of Contents for IP-420












































































































































Reviews:

No comments