– 66 –
This function moves the specified needle entry point. There are two methods of RELATIVE VERTEX
MOVE
and ABSOLUTE VERTEX MOVE
dependng on movng of the pattern data
In case of the relative vertex move : This function cannot be executed when the specified point the needle entry
pont other than the vertex.
In case of the absolute vertex move : This function cannot be executed when the specified point is the last needle
entry pont of the element or the needle entry pont other than the vertex.
(2) Vertex move (073 and 078)
Relative vertex move
In case of the relatve vertex
move, the whole pattern data
after the moved pont moves
whle holdng the relaton
before movng.
1
Select the relative vertex move.
Select and execute RELATIVE VERTEX MOVE (functon code
073)
n the code lst screen.
2
Specify the relative vertex move position.
Specfy the movng poston of the vertex usng MOVE key
B
n the relatve vertex move poston specfyng
screen, and press ENTER button
C
. Then the machne
control command deletion confirmation screen is displayed.
Absolute vertex move
As the result of moving the point, there is a case where a part of the created pattern
data exceeds the sewing area.
In such a case as this, modify the pattern data so that it is put within the sewing
area using the modification function.
Move
Move
A
In case of the absolute vertex
move, select and execute
ABSOLUTE VERTEX MOVE
(functon code 078)
. In
case of the absolute vertex move,
the pattern data after the moved
pont does not move.
C
B
3
Execute the vertex move.
When ENTER button
A
s pressed n the machne
control command deleton confrmaton screen, the vertex
move s executed, and the screen returns to the standard
screen.
