– 43 –
5
Perform setting of the needle position.
When NEEDLE POSITION SETTING button
C
s
pressed, the needle poston settng screen s dsplayed.
The needle poston at the tme of stop can be selected from
F
.
The selected button s changed n color. When ENTER button
G
s pressed, the selected contents are nputted, and
the screen returns to the stop screen.
Ths functon nputs one revoluton of sewng machne command.
(4) One revolution of sewing machine (006)
1
Select one revolution of sewing machine.
When selectng and executng ONE REVOLUTION OF
SEWING MACHINE (function code 006)
n the code
lst screen, the left-hand screen s dsplayed.
2
Input one revolution of sewing machine.
When ENTER button
A
s pressed n the left-hand
screen, one revoluton of sewng machne s nputted, and the
screen returns to the standard screen.
This function, combined with jump feed, is used
for basting or the like.
A
Button dsplay
Stop poston
Upper dead pont
UP poston
DOWN poston
UP position error will be produced at the time of
sewing when the needle position is set to DOWN
position at the end of sewing or before jump feed.
Needle stop instructions become invalid when
the sewing machine is in the stop state, and the
needle position does not change.
C
G
F
