– 36 –
This is an input function to create the needle entry point to the point which is separated an optional fixed
dstance n terms of the nput reference lne.
4-4. Double sewing
(1) Double orderly sewing (040 to 043)
Create the sewing so that the sewing composed with the input points and that of the offset figure are in
the same drecton.
There are 4 knds of double orderly sewngs below.
• Lnear double orderly sewng (functon code 040)
• Splne double orderly sewng (functon code 041)
• Arc double orderly sewng (functon code 042)
• Crcle double orderly sewng (functon code 043)
1
Display the linear double orderly sewing setting screen.
When selectng and executng LINEAR DOUBLE ORDERLY
SEWING (functon code 040)
n the code lst screen,
the lnear double orderly sewng settng screen s dsplayed.
2
Perform setting of the linear double orderly sewing.
The set value of present stitch length is displayed at STITCH
LENGTH INPUT button
A
, the set value of present
double sewng wdth s dsplayed at DOUBLE SEWING
WIDTH INPUT button
B
, and the set value of present
sewng speed s dsplayed at SEWING SPEED INPUT button
C
n the lnear double orderly sewng settng screen.
When the button of the tem you desre to change s pressed,
the nput screen of the set value s dsplayed. Settng
procedure n the nput screen of the respectve tems s the
same as that of the lnear ordnary sewng.
Creating direction of the double sewing can be specified
wth CREATING DIRECTION buttons
D
and
E
. Button
or
whch s changed n color s the
creatng drecton whch s selected now. When CREATION
DIRECTION, LEFT button
D
s pressed, the double
sewng s created on the left-hand sde n terms of the
progressing direction, and CREATING DIRECTION, RIGHT
E
is pressed, the double figure is created on the right-
hand sde n terms of the progressng drecton.
After settng, or when t s not necessary to change, press ENTER
button
F
, and the coordnate nput screen s dsplayed.
E
F
B
A
C
D
