– 109 –
1
Display the needle entry/shape points instructions screen.
When COORDINATE INSTRUTIONS button
s pressed
n the screen specfyng needle entry/shape ponts such as the
standard screen, the shape pont specfyng screen, etc., the
needle entry/shape ponts nstructons screen s dsplayed.
2
Instruct the coordinate.
When PATTERN DISPLAY REGION
A
s pressed n the
coordnate nstructons screen, the pressed poston s
selected. CROSS CURSOR
B
s dsplayed n the current
selecton poston.
3
Instruct the needle entry/shape points.
When NEXT CANDIDATE RETRIEVAL key
C
or
PREVIOUS CANDIDATE RETRIEVAL key
D
s pressed,
the needle entry near the cross cursor s retreved, and the
next or the prevous canddate s set to the selected state.
16-2. Needle entry/shape points direct instructions
Needle entry/shape ponts can be drectly selected.
4
Determine the entry/shape points.
When ENTER button
E
s pressed, the presser move
confirmation screen is displayed. Here, when ENTER button
F
s pressed, the presser moves to the poston
specified with the cross cursor, and the screen returns to the
specfyng poston screen n the state that needle/shape ponts
are selected.
When the needle entry pont s not selected, ENTER button
E
becomes nvald.
The presser moves linearly. When there is any
obstacle on the way, the presser interferes with it.
So, be careful.
C
E
B
A
D
F
