ON
OFF
Connecting the machine
Before connecting the power
supply, make sure that the voltage
and frequency shown on the rating
plate is conforming with your
mains power.
Place the machine on a stable
table.
1. Connect the power cord to the
machine by inserting the 2-hole
plug into the mains plug socket.
2. Connect the power line plug to
the wall outlet.
Connect the foot controller plug
if you use.
3. Turn on the power switch.
4. The sewing lamp will light up
when the switch is turned on.
5. After switching off, it will take
some time to consume the
residual power in the circuitry.
The light does not turn off
immediately after switching off
the power. This is normal
phenomenon for an energy
efficient appliance.
Attention:
Always make sure that the
machine is unplugged from power
source and the main switch is off
("O"). when the machine is not in
use and before inserting or
removing parts.
Polarized plug information
Foot Control
This appliance has a polarized
plug (one blade wider than the
other), to reduce the risk of
electrical shock; this plug will fit in
a polarized outlet only one way. If
the plug does not fit fully in the
outlet, reverse the plug. If it still
does not fit, contact a qualified
electrician to install the proper
outlet. Do not modify the plug in
any way.
With the sewing machine turned
off, insert the foot control plug into
its connector on the sewing
machine.
Turn on the sewing machine, and
then slowly depress the foot
control to start sewing. Release
the foot control to stop the sewing
machine.
Even if you use foot controller,
start/stop button is available.
13
