SECTION
PAGE
2 - 1
1
2 - 1 L - R positioner
Checking:
1. Move the needle to the left end by hand.
2. Check if the needle touches the left end of needle hole of needle plate.
Adjustment:
1. Lay the machine.
2. Loosen screw (1) and move L - R positioner (2) to left or right for adjust-
ment.
3. Tighten screw (1).
NOTE:
* Needle will be broken if needle is outside of left end of needle hole.
* Selector dial can not be turned smoothly if there is clearance of
more than 0.3 mm between left end of needle hole and needle.
