manualshive.com logo in svg

JUKI DDL-9000C-F Series, Instruction Manual, Page: 101 / 138

Share
Download
JUKI DDL-9000C-F Series Instruction Manual Download Page 101

– 97 –

8. HOW TO USE THE OPERATION PANEL (APPLICATION)

8-1. Management of sewing patterns

8-1-1. Creation of a new pattern

①

 Selecting the new-pattern creating function

A newly-created sewing pattern is registered by following the steps of procedure described below.

  * This operation is to be carried out under the maintenance personnel mode.

1. Press 

❶

 on the sewing screen un-

der the maintenance personnel mode.

  The "sewing pattern number list screen" is 

displayed.

<Sewing screen (Maintenance personnel mode)>

2. Press 

❷

.

  The "new pattern creation screen" is dis-

played.

②

 Setting the feed locus of sewing pattern

❶

1. Select feed locus 

❸

.

  (Feed locus changes.)
  Select the stitch shape by pressing stitch 

shape button 

❹

.

2. Press 

❺

 to confirm the setting.

  The "new sewing pattern edit screen" is 

displayed.

<New pattern creation screen>

❸

<Sewing pattern number list screen>

❷

❹

❺

Summary of Contents for DDL-9000C-F Series











































































































































Reviews:

No comments