– 1 –
1. GENERAL
1 Applicable bobbin, bobbin
case
Exclusive double-capacity bobbin and bobbin case.
2 Applicable thread count
#5 to #30 (Japan), 135 to 45 (TEX), 020 to 060 (TKT)
3 Applicable type of thread
Synthetic thread
4 Remaining-thread removal and
bobbin winding operation
Possible while the sewing machine is in operation.
5 Condition setting according
to the thread type
Conditions to be met to unravel the thread at the beginning of
winding a bobbin can be set.
6 Line voltage
100,120/200,220,240 Vac ±10 %, Single phase 50/60 Hz
7 Power consumption
100 VA
8 Air pressure used
0.5 to 0.55 MPa
9 Air consumption
156 Nℓ / min (max. value)
10 Dimensions
700 mm
(W) × 650 mm (L) × 430 mm (H) (Accessories includ-
ed)
11 Mass of the device
38 kg
12 Operating temperature range
5 ˚C to 35 ˚C
13 Operating humidity range
35 % to 85 % (No dew condensation)
14 Noise
- Equivalent continuous emission sound pressure level (L
pA
) at
the workstation : A-weighted value
≦
75 dB ; (Includes K
pA
=
2.5 dB) ; according to ISO 10821- C.6.2 -ISO 11204 GR2 at
remaining-thread removal length = 2 m; Bobbin-thread winding
length (22 m).
Conventionally, a series of operations including the replacement of a bobbin in the sewing machine
hook, removal of thread remaining on a bobbin, winding of a bobbin, threading of the bobbin case ten-
sion spring and trimming of thread have been carried out manually. Now, this device has been devel-
oped to carry out the series of operations full-automatically. This device not only helps increase efficien
-
cy of sewing work but also ensures stable product making in such processes that require high seam
quality.
Refer to the Instruction Manual for the AMS-221EN/AMS224EN/IP-420 for information about the main
body of the sewing machine.
1-1. Specifications of AW-3
