– 27 –
3-12. Example of operation
This clause gives an example of how to actually operate the device.
(1) In the case both of the two bobbins have been taken out of the device or both of the two
bobbins are empty
1) Turn the power to the device.
2) Set the bobbin-thread winding length to be wound on a bobbin.
Press
A
on the data input screen.
Press
C
on the AW setting
screen.
Set the bobbin-thread winding length us-
ing the +/- button or the numeric keypad
F
on the bobbin-thread winding length
setting screen.
After the entry of bobbin-thread winding
length, press
D
.
<Data input screen>
<AW setting screen>
<Bobbin-thread winding
length setting screen>
<Thread unraveling
strength setting screen>
3) Setting the thread unraveling conditions
Press
E
on the AW setting screen.
0: Without thread unraveling function
1: Min. to 5: Max.
Then, specify the thread unraveling conditions using the +/-
button or the numeric keypad
H
.
After the entry of bobbin-thread winding length, press
G
.
A
C
E
B
F
H
D
G
