manualshive.com logo in svg

JUKI APW-896N/IP-420, Instruction Manual, Page: 82 / 142

Share
Download
JUKI APW-896N/IP-420 Instruction Manual Download Page 82

− 78 −

(1) Method to select and use the customized data

12. CUSTOMIZING THE PEDAL OPERATION

①

  Display the pedal customizing screen

 

Press MODE CHANGEOVER key 

 and PEDAL CUSTOMIZ-

ING button 

 

A

 is displayed on the screen.

 

Press this button and the pedal customizing screen (screen A) is 
displayed.

②

  Select from button 

B

 5 kinds of pedal operation that are regis-

tered as customized. At this time, the contents of selected pedal 
operation data are displayed at 

C

.

③

  When SCREEN END button 

 

D

 is pressed, the selected 

pedal operation data is determined and the screen returns to the 
original screen.

B

Operation functions of “Binder down”, “Flap presser down”, etc. in terms of the number of the respective de-
pressing steps of the pedal can be optionally registered in accordance with the using conditions.
In addition, the customized pedal operation data can have as many as 5 kinds. Select and use them.

C

D

Pedal customizing screen 

(Screen A)

A

Summary of Contents for APW-896N/IP-420















































































































































Reviews:

No comments