− 51 −
(2) Sewing data list
1
Items that are displayed in the data input screen
. . . Item that is not displayed due to other setting state
No.
Item
Setting range
/
Edit unit
Initial value
Motion mode change-over
With/without of motion of sewing machine motor, center knife and corner
knife is selected.
- - -
Cloth feed mode
Cloth feed, sewing
machne thread trmmng
and center knife mode
Cloth feed, sewing
machne thread trmmng
Cloth feed, sewing
machne thread trmmng,
center knife and corner
knife mode
Sewing mode change-over
Sewng mode s selected.
＊
In case of alternate sewing, flap priority sewing is set with
.
- - -
L sze sewng
Left flap sewing
Right flap sewing
Flap prorty sewng
L size setting
In case of L size sewing, the sewing length is set.
＊
It is possible to set only when setting L size sewing
.
18.0 to
220.0
/
0.1mm
150.0mm
Marking light irradiation position change-over
Sewng start rradaton/sewng end rradaton/center rradaton s
selected.
- - -
Sewng start rradaton
Sewng end rradaton
Center rradaton
Flap concealed stitching data (Left sewing start)
Position of sewing start of left-hand flap is adjusted.
＊
It is possible to set only when
is set to flap sewing.
–9.9 to 9.9
/
0.1mm
0.0mm
Flap concealed stitching data (Left sewing end)
Position of sewing end of left-hand flap is adjusted.
＊
It is possible to set only when
is set to flap sewing.
–9.9 to 9.9
/
0.1mm
0.0mm
Flap concealed stitching data (Right sewing start)
Position of sewing start of right-hand flap is adjusted.
＊
It is possible to set only when
is set to flap sewing.
–9.9 to 9.9
/
0.1mm
0.0mm