– 74 –
1
Display the data input screen.
Only n case of the data nput screen (pnk) t s possble to n-
put the combnaton data. In case of the sewng screen (green),
press READY swtch
to dsplay the data nput screen
(pnk).
When new combnaton sewng data s regstered by means
on the new combnaton data regstraton button
on the
data nput screen, the screen at left s dsplayed.
/
Refer to
-2-19. Performing new register of pattern button” p.60
.
2
Display the pattern No. selection screen.
When PATTERN SELECTION button
A
s pressed, the
pattern No. selecton screen s dsplayed.
3
Select the pattern No.
When UP/DOWN SCROLL button
B
s pressed,
pattern No. buttons
C
whch have been regstered are
changed over n order.
It s also possble to dsplay the pattern No. nput screen by
means of NUMBER INPUT button
D
and nput a pat-
tern No. drectly. The contents of pattern data are dsplayed n
the buttons. Here, press the pattern No. buttons you desre to
select.
4
Determine the pattern No.
When ENTER button
E
s pressed, the pattern No. se-
lection screen is closed and the selection is finished.
5
repeat steps
2
through
4
as many as the number of pat-
tern Nos. you desire to register.
When the first register is determined, the second pattern selec
-
ton button
F
s dsplayed.
Repeat steps
2
through
4
as many as the number of pattern
Nos. you desre to regster.
A
C
B
F
E
D
2-26. Performing combination sewing
(1) How to create new combination data
Frst, change the sewng mode to the combnaton sewng before performng settng.
/
