– 43 –
Press STEP SEWING button
A
on the sewng screen to
dsplay the step sewng screen.
The sewng shape s dsplayed at the center of the screen. The
current pont, sewng start poston and sewng end poston
are respectvely represented by (pnk crcle), (blue dot) and
(pnk dot).
Press the MODE SELECT button
B
to select the thread
tenson mode.
When ONE-STITCH BACKWARD button
C
or FOR-
WARD button
D
s pressed, the feed (current pont )
moves backward or forward by one sttch.
If two or more commands ncludng the thread trmmng com-
mend have been entered, the feed wll not move when the
ONE-STITCH BACKWARD/FORWARD button s pressed,
but the command shown on the command dsplay
a
wll be
changed over.
If the ONE-STITCH BACKWARD/FORWARD button s held
pressed for a longer tme, the feed movng speed wll ncrease.
The value
B
dsplayed represents the number of sttches.
When COMMAND SEARCH FORWARD button
E
or
BACKWARD button
F
s pressed, the feed moves for-
ward or backward from the current pont to reach the needle
entry point where the first thread tension command is found.
To stop the feed, press button
C
,
D
,
E
,
F
,
G
or
H
.
When PRESSER DOWN button
G
s pressed, the
presser plunger goes up or comes down. When CANCEL but-
ton
K
s pressed, the presser plate moves to the nterme-
date standby poston and the screen s returned to the sewng
screen.
When PRESSER INITIAL POSITION button
H
s
pressed, the presser plate drectly moves to the sewng start
poston.
When COMMAND DELETE button
I
s pressed, the
screen for deletng the command as shown n
a
s dsplayed.
When
J
s pressed, the thread tenson value ncrease/
decrease nput screen s dsplayed.
Input a desred value on the thread tenson value ncrease/de-
crease nput screen usng numerc keypad and +/– keys
L
.
When ENTER button
M
s pressed, the data s con-
firmed.
2-9. Performing modification of needle entry point
A
B
M
D
G
E
H
I
a
B
J
C
L
F
K
