– 1 –
1. SPECIFICATIONS
I. MECHANICAL SECTION (WITH REGARD TO THE SEWING MACHINE)
1 Sewing area
X (lateral) direction
Y (longitudinal) direction
AMS-224EN-4530
: 450 mm ×
300 mm
AMS-224EN-6030 : 600 mm × 300 mm
2 Max. sewing speed
2,500 sti/min (When sewing pitch is 3 mm or less)
3 Settable stitch length
0.1 to 12.7 mm (Min. resolution : 0.05 mm)
4 Feed motion of feeding frame Intermittent feed (2-shaft drive by stepping motor)
5 Needle bar stroke
41.2 mm
6 Needle
DP x 17
7 Lift of feeding frame
Max. 30mm
8 Intermediate presser stroke
4 mm (Standard) (0 to 10 mm)
9 Lift of intermediate
presser
20 mm
10 Intermediate presser
DOWN position
variable
Standard 0 to 3.5 mm (Max. 0 to 7.0 mm)
11 Shuttle
Double-capacity semi-rotary hook
12 Lubricating oil
New Defrix Oil No. 2 (Supplied by oiler)
13 Memory of pattern
data
• Main body : Max. 999 patterns (Max. 50,000 stitches/pattern)
• External media : Max. 999 patterns (Max. 50,000 stitches/pattern)
14 Temporary stop facility
Used to stop machine operation during a stitching cycle.
15 Enlarging / Reducing
facility
Allows a pattern to be enlarged or reduced on the X axis and Y axis independently
when sewing a pattern. Scale : 1% to 400% times (0.1% steps)
16 Enlarging / Reducing
method
Pattern enlargement / reduction can be done by increasing / decreasing either stitch
length or the number of stitches. (Increasing/decreasing stitch length only can be
performed when pattern button is selected.)
17 Max. sewing speed
limitation
200 to 2,500 sti/min (Scale : 100 sti/min steps)
18 Pattern selection
facility
Pattern No. selection method
19 Bobbin thread counter
UP/DOWN method (0 to 9,999)
20 Sewing counter
UP/DOWN method (0 to 9,999)
21 Memory back-up
In case of a power interruption, the pattern being used will automatically be stored in
memory.
22 2nd origin setting
facility
Using jog keys, a 2nd origin (needle position after a sewing cycle) can be set in the
desired position within the sewing area. The set 2nd origin is also stored in memory.
23 Sewing machine motor Servo-motor
24 Dimensions
AMS-224EN-4530 : 1,703mm (W) x 1,370mm (L) x 1,200mm (H) (Excluding thread stand)
AMS-224EN-6030 : 1,923mm (W) x 1,370mm (L) x 1,200mm (H) (Excluding thread stand)
25 Mass (gross mass)
AMS-224EN-4530
: 401 kg
AMS-224EN-6030
: 410 kg
26 Power consumption
550 VA
27 Operating temperature
range
5˚C to 35˚C
28 Operating humidity range 35 % to 85 % (No dew condensation)
29 Line voltage
Rated voltage ±10% 50 / 60 Hz
30 Air pressure used
AMS-224EN-4530
: 0.5 to 0.55 MPa (Max. 0.55 MPa)
AMS-224EN-6030
: 0.5 to 0.55 MPa (Max. 0.55 MPa)
31 Air consumption
1.8 dm
3
/ min (ANR)
32 Needle highest
position stop facility
After the completion of sewing, the needle can be brought up to its highest position.
33 Noise
- Equivalent continuous emission sound pressure level (L
pA
) at the workstation :
A-weighted value of 83.5 dB ; (Includes K
pA
= 2.5 dB) ; according to ISO 10821- C.6.3
-ISO 11204 GR2 at 2,500 sti/min.
- Sound power level (L
WA
) :
A-weighted value of 92.5 dB ; (Includes K
WA
= 2.5 dB) ; according to ISO 10821- C.6.3
-ISO 3744 GR2 at 2,500 sti/min.
