– 35 –
(5) XY travel distance tab
It is possible to move the pattern in parallel. Lower the feeding frame. Lower the feeding frame. Then,
set the travel distance by which the pattern is moved with TRAVEL button. Sewing cannot be performed
while this tab is selected. Select a different tab in prior in order carry out sewing,
1) Basic operation
①
Selecting the XY travel distance tab
Select XY travel distance tab
A
with MULTIFUNCTION
TAB DISPLAY SELECTION button.
②
Setting the XY travel distance
Operate the pedal to lower the feeding frame. Then, set the
travel distance by which the pattern is to be moved with TRAV-
EL button
B
.
2) Clearing travel distance
①
Clearing the XY travel distance
Operate the pedal to lower the feeding frame. Then, press
RESET button
C
shortly to return the travel distance to
the previous value, or keep the button held pressed for one
second to clear the travel distance to 0.0 mm.
2-4-4. How to change the parameter
Parameters of the selected pattern can be changed.
①
Displaying the HOME tab of the pattern setting screen
Display the pattern setting screen. Then, select HOME tab
A
with the MULTIFUNCTION TAB SELECTION button.
②
Displaying the parameter setting screen
When the parameter
B
to change is selected from HOME tab
A
, the parameter setting screen is displayed.
Be aware that the feeding frame moves when the
travel distance is cleared.
The XY travel distance cannot be set unless the feed-
ing frame is in its lower position.
B
A
D
B
A
WARNING :
After you have changed the XY enlargement / reduction ratio, be sure to check the pattern shape.
If the pattern exceeds the feeding frame size, the needle can interfere with the feeding frame
during sewing, posing a risk of needle breakage, etc.
