JUKI AMB-289/IP-420, Instruction Manual, Page: 20 / 33

Ⅰ–17
(5) Set of the button neck wrapping
When performing the button neck wrapping
process of stay (counter) button, use the button
neck wrapping attachment (accessories)
1
.
Loosen screws
2
and move holder plate
3
to
and fro to perform the adjustment of the height of
button neck wrapping attachment.
[Setting procedure of the button neck wrapping
attachment]
Insert convex
4
of the attachment to concave
5
of the feed plate at the time of the button neck
wrapping process pattern.
Confirm that button neck wrapping
positioning grooves A and B are
straight front and rear.
1
2
4
5
(6) Set of the sewing flat button with blindstitch
When performing the sewing flat button with
blindstitch, insert underplate spacer A
1
supplied
as accessories (Part No. : 40020764) to the pin
position. In addition, fix it with screws
2
when
using it always.
Select and use a proper underplate spacer from
among the underplate spacers below according to
the thickness of cloth.
1
2
Height of
button neck
wrapping
3
Groove B
Groove A
Groove
A
Groove
B
Discription Thickness Part No. Remarks
UNDER_PLATE_
SPACER A
t=1.6 40020764 Accessory
UNDER_PLATE_
SPACER B
t=2.0 40020769 Optional
UNDER_PLATE_
SPACER C
t=2.6 40020770 Optional