– 50 –
(1) selection on the data entry screen
1
Displaying the data entry screen
The belt loop pattern number can be selected on the data
entry screen (blue). If the sewng screen (green) s dsplayed,
press set ready key
to dsplay the data entry screen.
2
Bringing up the pattern number selection screen
When you press belt loop pattern number selecton button
A
, the belt loop pattern number selecton screen s
dsplayed. The belt loop pattern number whch s currently
selected and ts detals are dsplayed on the upper part of the
screen and the lst of the belt loop pattern number buttons s
dsplayed on the lower part of the screen.
3
selecting a belt loop pattern number
Every tme you press up/down scroll buttons
B
,
the regstered belt loop pattern number button
C
changes
over one after another. The button ndcates the detals of the
sewng data entered for the belt loop pattern number. Press
belt loop pattern number button
C
correspondng to the pat-
tern you want to select.
4
Confirm the belt loop pattern number
When you press enter button
D
, the belt loop pattern
number selection screen is closed to finish the selection.
*
If you want to delete the regstered belt loop pattern number,
press delete button
E
. It should be noted, however, that
the belt loop pattern No. regstered n the cycle sewng cannot
be deleted.
A
C
B
E
D
2-11. How to select a belt loop pattern number