– 21 –
5-2. Winding a bobbin
Thread the bobbn wnder and wnd the bobbn
thread onto the bobbin as illustrated in the figure.
(1) to wind a bobbin while the sewing machine is performing sewing
(2) to wind a bobbin independently
the bobbin winding will not start immediately after
turning the power on. to activate the bobbin winding
function, set a pattern number or the like first, then
press the set ready key
to invoke the sewing
screen. In this state, the bobbin winding function is
enabled.
1
Displaying the bobbin thread winding screen
Press bobbn wndng button
A
on the belt loop data
nput screen (blue), and the bobbn wndng screen appears on
the screen.
2
starting bobbin winding
Press the start swtch, and the sewng machne rotates to start
bobbn wndng.
3
stopping the sewing machine
Press stop button
B
, and the sewng machne stops and
returns to the normal mode. If you press the start swtch agan
durng bobbn wndng, the sewng machne stops under the
bobbn wndng mode. If you press the start swtch agan n ths
state, the sewng machne re-starts bobbn wndng. Use ths
operatng procedure when you want to wnd thread on two or
more bobbns.
B
In the case you only want to carry out bobbin winding
on the sewing machine, unthread the needle and re-
move the bobbin from the hook.
A
