NORTHSTAR ECHO USER’S MANUAL
© 2018 JTECH Medical MN065_N
12
Notice: It is recommended not to use the Flat Pad with the Algometer for anything other than calibration.
Improper use of the Flat pad could result in exceeding the force limits of the device. Exceeding the force limits
of the device can permanently damage the internal components of the Algometer.
Accessories
1.0cm
2
Algometer Tip (8AC005) – The
1.0cm
2
Algometer Tip conforms to
normative testing.
Flat Pad (8AC008) – The flat pad
is used for calibration of the
algometer.
0.5cm
2
Algometer Tip (8AC006) – The
0.5cm
2
Algometer Tip can be used for
cervical testing.
Finger Tip Adapter (8AC007) – The
Finger Tip Adapter converts the
Algometer for testing individual
finger strength.
Wireless Algometer
(9RF407)
Used to convey pain response and pressure threshold.
1. Attach appropriate accessory to Algometer by inserting the metal shaft
on the accessory into the accessory receptacle on the Algometer.
Note: One of the Algometry Tips must be used with the Algometer.
2. Push the “On” button on the Algometer to enable communication with
the Northstar Receiver.
For instructions on performing specific tests, please refer to the multimedia
help system in the Northstar Software.
For troubleshooting information, please see page 18.
For technical specifications, please see page 28.
Features and Benefits
• Multiple tip sizes for different testing applications.
• Replaceable rubber tips.
• Use for both Algometry and Finger strength testing.
• Measures up to 25 lb.
• Axis Compensation
TM
“smart” load cell technology. Maintains accuracy even
when force is applied off-center.
Wrist Lanyard (7AC006) – The
Wrist Lanyard is used to help
prevent dropping devices when
carrying, or when performing
some tests.
Wireless Algometry End Test
Switch (RF116) – Used by
patients during pain response
or pressure threshold tests to
end the current test.
