AUS Pop-Up Powering Outlet
Installation Instructions
How to Install the Outlet
Step 1 -
Select a location for the pop-up
outlet that meets the following requirements:
•
The edge of the cut out should be at least
40mm from the nearest wall.
•
A power outlet should be within 1.5 meters
of the installation cut out for the power cord
to reach.
Step 2 -
Cut a hole in surface of the
countertop using the above requirements of
your corresponding model.
of space needed
under countertop
of space needed
under countertop
of space needed
under countertop
countertop
thickness
countertop
thickness
Cut out size
Cut out size
Cut out size
400
mm
400
mm
405
mm
10-45
mm
10-45
mm
0290-00902-AUS
0290-00902QI-AUS
0290-00904-AUS
0290-00904QI-AUS
0290-00903PQI-AUS
COVER
OVERLOAD SWITCH
MODULE
RELEASE BUTTON
POWER CORD
BODY
FIXED RING
BOTTOM CAP
0290-00902-AUS
0290-00902QI-AUS
0290-00902-AUS
0290-00902QI-AUS
0290-00903PQI-AUS
•
For indoor use only.
•
Avoid liquid flowing into the socket.
•
Be sure to ground connection.
•
Do not disassemble without permission.
•
If something goes wrong, please have
repaired by a professional.
CAUTION – READ CAREFULLY
Visit our Support Library at
support.dockingdrawer.com to find additional
mounting diagrams and cut out templates.
95-100
mm
95-100
mm
105
mm
countertop
thickness
10-50
mm