©JRI Maxant
20
+
Working LED (green):
2’’ => starting measurements
then flashes every 1 minute
at a programmed date and time:
by the change of a logic input (on channel 2)
g)
Manual start
Press shortly on the pushbutton
It displays the temperature in °C degrees, channel number, measurement unit and memory
status.
The green LED flashes every minute.
h)
Alarm visualisation
The SPY RF is equipped with different alarm indicators, when a threshold limit is overpassed.
Pre alarm
Alarm
+
Alarm LED (red):
Flashes every 15’’.
+
Threshold indicator
High or low
Value measured
Flashes every 15”
dd / mm / yy
hh / mm / ss
+
Working LED (green):
2’’ => starting
measurements
then flashes every 1
minute
Working LED (green):
2’’ => starting measurements
then flashes every 1 minute
