Operating instructions
Design and function
5
5
Design and function
5.1
Peripherals of the Hycleen Des 30
Peripherals
1 Power supply 230 VAC, 50 Hz
2 System shut-off valve
3 Softening unit (ion exchanger)
4 Pre-filter (5 µm)
5 Flow meter with impulse transmitter
6 Hycleen Des 30 Standard version
7 Venting into the open air
8 Dosing unit with shut-off valve and backflow preventer
9 Anolyte dosing pump
10 Drain outlet
11
Monitoring: e.g. monitoring the concentration of free chlorine or other drinking water
parameters (ORP, pH value, conductivity, or total chlorine content)
We recommend using a limescale sensor (for connection to the control unit see Chapter 8.4)
to protect the Hycleen Des 30 from hardness dips / malfunction of the water softening system
(3).
Shut-off valve (2), ion exchanger (3) and optional measuring unit for monitoring the
concentration of free chlorine (11) are not included. All other components, as well as
operating fluids, can be obtained from GF JRG, see Chapter 13.2 "Accessories required" on
page 73.
Summary of Contents for 9800.002
Page 6: ...Operating instructions Intended Use...
Page 7: ......
