manualshive.com logo in svg

JRC JMA-7122-6XA, Installation Manual, Page: 135 / 316

Share
Download
JRC JMA-7122-6XA Installation Manual Download Page 135

JMA-9100/7100 Installation Manual > 4.INITIAL SETTING > 4.2  TUNE ADJUSTMENT

4

－

7

4

4.2

TUNE ADJUSTMENT

Tune control of the transmitter and the receiver is conducted. 

This adjustment is made at the installation and the replacement of magnetron.

Procedures

1)

Open the [Service Man Menu] screen.

2)

Open the [1.Tune Adjustment] screen according to the operation shown 
below.

For how to input values on the value input screen, see Section 3.3.4 in the 
instruction manual.

3)

Operate the  +  or  -  button to set the tune adjustment value so that the tune 
bar at the upper left on the screen is maximized.

4)

 Left-click the  ENT  button to confirm the value.

 

1. Adjust Menu

→

1. Tune Adjustment 

Summary of Contents for JMA-7122-6XA





























































































































































































































































































































Reviews:

No comments