JRC JMA-5206, Instruction Manual, Page: 97 / 462

3 ─ 28
3
3.5 BASIC OPERATIONS
y
y y
[V] Setting the EBL1 bearing fix mode (EBL1 Bearing FIX)
While this function is set to ANGLE , an EBL is fixed to the preset bearing. For example, if the true
bearing 020
°
is preset, the EBL is fixed to the true bearing 020
°
even when the own ship turns.
While the function is set to SCREEN , the EBL is fixed on the radar display.
Procedures 1 Press [RADAR MENU] key twice.
Press [3] key
Press [1] key.
The EBL1 Setting Menu will appear.
2 Press [3] key.
The setting of EBL1 Bearing Fix will be
switched between ANGLE and
SCREEN .
ANGLE : EBL1 bearing is fixed to the
preset value.
SCREEN : EBL1 bearing is fixed on the
radar display.
[VI] Setting the EBL2 bearing fix mode (EBL2 Bearing Fix)
Procedures 1 Press [RADAR MENU] key twice.
Press [3] key.
Press [2] key.
The EBL2 Setting Menu will appear.
Subsequently, set the EBL2 bearing fix mode performing the same operation as explained in
[V] .
Note: The course data is required for activating this function.
EBL1 Setting
1. EBL1 Bearing REF
TRUE
2. EBL1 Floating
OFF
3. EBL1 Bearing Fix
SCREEN
0. EXIT