JRC JMA-5206, Instruction Manual, Page: 234 / 462

5 ─ 15
ATA Setting
1. Vector Time
6 min
2. Past Position
OFF
3. CPA Limit
10 nm
4. TCPA Limit
1 min
5. CPA Ring
ON
9. Target Number Display
0. EXIT
ON
5.2.3 Displaying Target ID No. (Target Number Display)
A target ID number is a value displayed beside the acquisition symbol when a target is acquired.
ID numbers are assigned to targets in acquisition order. When the NCA-877 option is installed, ID numbers 1
to 30 are automatically assigned. Each target is identified by the assigned ID number until it is lost or its
acquisition is canceled.
Procedures 1 Press [ATA MENU] key.
2 Press [1] key.
The ATA Setting menu will appear.
3 Press [9] key.
The Target Number Display is switched ON or
OFF.
ON: Displays target ID numbers.
OFF: Hides target ID numbers.
ATA TRACK: Displays target ID number with
ATA track.
If there are many tracking targets and their
symbol display is confusing, set Target
Number Display to OFF to view the radar
display easily.
Note: An ID number is always displayed for targets with which numeric data is displayed.