3.5.1.1 Switching Among Input Signals
Procedure
1. Choose TOOLS from the Adjustment menu and press .
2. Choose INPUT from TOOLS and press .
3. Select D-SUB or DVI with or .
4. Press to exit.
3.5.1.2 Setting Input Signal Selection
Setting
Function
Auto
The monitor recognizes the connector through which PC signals are input. When a PC is
turned off or enters the power saving mode, the monitor automatically displays another signal.
Manual
The monitor detects only the PC’s signals currently displaying automatically. Select an active
input signal in the Adjustment menu.
Procedure
1. Choose TOOLS from the Adjustment menu and press .
2. Choose INPUT SELECTION from TOOLS and press .
3. Select AUTO or MANUAL with or .
4. Press to exit.
Note When AUTO is selected for “Input Selection”, the monitor’s power saving function works only when all
PCs are in the power saving mode.
3.5.2 Displaying Monitor Information
3.5.2.1 Displaying Signal Information
This function displays the information about the current input signals displayed.
Procedure
1. Choose TOOLS from the Adjustment menu and press .
2. Choose SIGNAL INFO from TOOLS and press .
The SIGNAL INFO appears (example).
29 | Operation