manualshive.com logo in svg

JRC Alphatron Marine AlphaScreen19, User Manual, Page: 17 / 57

Share
Download
JRC Alphatron Marine AlphaScreen19 User Manual Download Page 17

3.1.3.4 Adjusting Hue

This function allows you to adjust the hue.

Adjustable Range

-100 to 100

Procedure

1. Choose COLOR from the Adjustment menu and press  .

2. Choose ADVANCED SETTINGS from COLOR and press  .

3. Choose HUE and press  .

4. Press   to exit.

Attention  Using this function may make some color gradations unavailable for display.

3.1.3.5 Adjusting Color Saturation

This function allows you to adjust color saturation.

Adjustable range

-100 to 100

Procedure

1. Choose COLOR from the Adjustment menu and press  .

2. Choose ADVANCED SETTINGS from COLOR and press  .

3. Choose SATURATION and press  .

4. Use   or   for adjustment.

5. Press   to exit.

Attention  Using this function may make some color gradations unavailable for display.

Note  The minimum value (-100) changes the screen to monochrome.

3.1.3.6 Enhancing Image Outline

Outline Enhancer functions to emphasize outline of the images by emphasizing the color difference between pixels
composing the images. This may improve the texture of the material and its feel of the images. On the other hand, it also
functions to reproduce the images smoothly by gradating its outline.

Procedure

1. Choose COLOR from the Adjustment menu and press  .

2. Choose ADVANCED SETTINGS from COLOR and press  .

3. Choose OUTLINE ENHANCER and press  .

4. Select the display status in the range from -3 to 3 (soft to sharp) with   or   as desired.

5. Press   to exit.

3.1.3.7 Adjusting Gain

The brightness of each color component red, green, and blue is called “Gain”. You can change the hue of “white” by
adjusting gain.

Adjustable range

0 to 100%

17  |  Operation

Summary of Contents for Alphatron Marine AlphaScreen19


























































Reviews:

No comments