5.2.3 Periodic Check Table 3
Perform maintenance and check once a year.
Part Name
Part No.
Interval
Sensitive Element
3107.9152
2 - 3
Brush
3107.9154
2
Step Motor
3107.9158
6
Belt
3107.9160
6
HRZC PWB
3107.9162
6
Inverter PCB
3107.9164
6
Gpower PWB
3107.9170
6
Flexible wire (EAST)
3107.9168
8
Slop Ring
3107.9166
8
Table 20: Maintenance and Check Interval
5.3 Information to be supplied to Alphatron Marine
When failures can not be corrected on board by the solutions described in this manual, immediately contact Alphatron
Marine, or nearest agency in your area, to request advice and supply the following information:
1
Ship's name and owner
2
Equipment name, type and serial no.
3
Where is the ship now?
4
Symptoms failure (Error code/name)
5
When did it occur?
Year
Month
Day
Hour
6
Where did it occur?
Sea area
Channel/River
7
Does it still continue?
Continues
Intermittently
8
Does it occur repeatedly?
Yes
Intermittently
No
9
Check results
10
Other points observed
11
5.4 Accessories
The following accessories may be added to the AlphaMidiCourse:
80 | Appendices
Summary of Contents for Alpatron AlphaMidiCourse
