RTU-292C Operations Manual
4-4
4.3.4
Date Command
DATE <ddmmyy> <CR>
This command is used to check or set the date on the RTU-292C internal clock. If no parameters are
given the command simply returns the time/date. The parameter format is day (01-31), month (01-12),
year (00-99).
Note: the Call Logging Feature must be enabled before use. See 3.7.12.
Expected Response: Time/Date Response.
Examples:
DATE <CR> ; Command requesting the current time and date from the RTU-292C.
%01-MAR-98 11:05:20 E0 <CR> ; Status returned indicating that the date is March 1
st
‘98, and the time
is
;11:05 and 20 seconds in the morning.
DATE 051297 <CR> ; Command to set the date to December 5, ’97.
%05-DEC-97 14:18:30 E0 <CR> ; Status returned indicating that the date is December 5
th
‘97, and the
time is
; 2:18 and 30 seconds in the afternoon.
4.3.5
Dial Command
DIAL <OPER|LP|number string> <CR>
This command is used to dial a phone number via PSTN line.
Note: the RTU-292C must be on-hook
to use this command.
The parameter
OPER
may be substituted for the number. In this case the call will be placed to the front
panel of the RTU-292C. Likewise the parameter
LP
may also be substituted for the number. This will
cause the call to be routed to the Local Phone option (if installed).
Valid digits for the number string are '0'-'9', the characters * # and ','. The comma character is used to
produce a 2 second pause while dialing. No spaces are allowed in the number string.
Expected Response: Dial Response.
Examples:
DIAL 5551234 <CR> ; Command requesting the RTU-292C to dial the number 5551234.
%DIAL 5551234 E0 <CR> ; Status returned indicating that the number 5551234 was dialed.
DIAL OPER <CR> ; Command requesting the RTU-292C to call the Operator (front panel).
%DIAL OPER E0 <CR> ; Status returned indicating that the call was placed to the Operator.
DIAL LP <CR> ; Command requesting the RTU-292C to call the Local Phone option.
%DIAL LP E4 <CR> ; Error status returned indicating that the Local Phone option is not installed in
this unit.
DIAL 5551234 <CR> ; Command requesting the RTU-292C to dial the number 5551234.
%DIAL 5551234 E5 <CR> ; Status returned indicating that the number could not be dialed because the
unit is
; already off-hook.
Summary of Contents for RTU-292C
