Joyner JNSZ800DL, Owner'S Manual, Page: 74 / 94

Figure 15 Figure 16
Put the vehicle on level ground.
1. Turn the coolant cap counterclockwise and open the cap
(see Fig. 15) .
2. Pour fresh coolant to filler neck.
3. Start the engine at idle.
4. Increase the engine rev’s a few times
5. Repeat 2,3,4 till the coolant is at neck and no bubbles come up.
6. Refit the coolant cap, turn it clockwise and tighten it
7.
Turn the reserve coolant case cap counterclockwise and open the cap (see Fig. 16) .
8. Pour fresh coolant of the specified type into the reserve coolant tank till the coolant
reaches 2/5 to 3/5 of the reserve coolant tank volume.
9. Close the reserve coolant case cap, turn it clockwise and tighten it
Top up the reserve coolant
If the coolant in the reserve tank is less than 2/5, it needs to be topped up.
1. Turn the reserve coolant case cap counterclockwise and open the cap.
2. Pour fresh coolant of the specified type into the reserve coolant tank till the coolant
reaches 2/5 to 3/5 of the reserve coolant tank volume.
3. Close the reserve coolant case cap, turn it clockwise and tighten it
SERVICE INSTRUCTIONS
Opening the radiator cap while the engine is hot can be hazardous.
Opening the radiator cap can spray the high temperature coolant in your eyes,
face and any parts of your body. This can result in severe injury.
Never open the radiator cap while the engine is hot.
New and used coolant can be hazardous.
Children and pets may be harmed by new or used coolant.
Continuous or brief contact with coolant may be dangerous for your health.
Keep new and used coolant away from the children and pets. To minimize your
exposure to new and used coolant, wear a long sleeve shirt and moisture-proof
gloves(such as dishwashing gloves) when you change coolant. If coolant contacts
your skin, wash thoroughly with soap and water. Wash any clothing or rags if wet
with coolant. Recycle or properly dispose of used coolant.
25