Joyner JNSZ800DL, Owner'S Manual, Page: 66 / 94

Fig. 1
OPERATION
d. Start engine
1. Engage the park brake
2. Press the clutch pedal down,
put the shift lever in neutral
3. Insert the key into the
ignition-switch
Fig. 2
F
If the engine is cold;
1. Pull the choke out fully
2. Press down the clutch pedal
3. Turn the key clockwise to
the “on” position. Release the key
and the clutch pedal when the
engine starts.
Fig. 3
4. Push the choke back slowly to allow the engine to run smoothly. Keep engine
runn
ck fully. If the idle of engine is not smooth, pull out the choke
to fin
f the engine is warm;
lightly and turn the key clockwise to the “on” position, release
the k
ing for 1-2 minutes.
5. Push the choke ba
d the best running position and keep running for a while long until the engine ryns
smooth without choke.
I
Press the throttle s
ey and the throttle when the engine starts.
17