14
4. Using the iAED-S1
4.1 Overview
T
his chapter describes how to use the iAED-S1. The device provides voice
prompts and indications for users throughout the rescue.
If you think someone is in SCA, follow these steps:
1. If other rescuers are available, ask them to call for emergency medical
assistance. Check the patient and get the iAED-S1.
2. If you are the only rescuer, first call the emergency services, quickly get the
iAED-S1 and bring it to the patient. If there is any delay in getting the
defibrillator, perform cardiopulmonary resuscitation (CPR) until the iAED-S1 is
available.
There are three basic steps to use the iAED-S1 to treat someone who may be
in SCA:
1. Press the ON/OFF button.
2. Apply pads on the patient's chest.
3. Press the shock button as instructed by the iAED-S1 voice prompts.
4.2 Preparation
Make sure all the steps in 3 Setting up the iAED-S1 are already finished.
The pads should be kept clear of other electrodes, lead wires, dressings,
medicine patches in contact with patient, etc.