DVD HOME THEATER
SYSTEM
–If Equipped
The available DVD home theater
system operates from 120-volt AC
household current only, so you must
have either the shoreline connected, the
generator running, or the inverter turned
on (if equipped).
The TV is connected to the home
theater system, which plays through
theater speakers in the lounge area of the
coach.
Set TV Video Input
•
Turn
on the
TV,
DVD
player, and Video Selection box.
(Switch the Video Selection box to
DVD for the TV that you are going to
use).
•
Press INPUT
button on the
remote or front of
TV and select the
DVD input
channel on the TV.
Sony
®
: “Video 1
or Component 2”
Sharp
®
: “Input 1
or Input 2”
•
The TV screen will display the DVD
player logo when the correct input is
selected.
Play DVD with Theater
Sound
•
Insert DVD into player. DVD will
begin to load automatically. TV
screen will typically show
“READING” or “LOADING”.
•
The DVD may load
directly to the main title/
menu screen or it may
begin to play previews. You may be
able to skip previews if desired by
pressing the chapter “advance”
button until you see the main menu
screen.
•
When the main
menu screen
appears, use the
arrow buttons on
the remote to
select the desired
entry or press the
ENTER or PLAY
buttons on the remote (or “Play”
button on DVD player) to begin
playing the feature.
•
Volume is adjusted with the DVD
remote (or volume control on DVD
player).
TV Sound through Home
Theater Speakers
When watching TV programs
(broadcast, cable, or satellite), the TV
normally plays sound through its own
built-in stereo speakers. To connect TV
sound output to home theater speakers
for a richer sound quality, follow these
steps:
•
Turn the TV and DVD player On.
•
Select the TV channel you wish to
watch.
•
Press FUNCTION button on DVD
player or remote to set DVD player to
“TV/VIDEO”.
•
Use the TV Menu button to set TV
audio output to “Variable Audio
Output” (See TV owner’s manual for
instructions.) This will route TV
stereo sound output through the
home theater system.
•
Adjust theater speaker master
volume to maximum on the DVD,
then control volume with the TV
remote.
Continued—
